relwalplastering
New Member
Hi lads, we have until now stayed away from acrylic rendering, we mostly do mono's, s&c, and internals, recently we have been asked to look at two acrylic jobs approx 1200m2, we have some reservations regarding both
The first one is a Kilsaran base coat with a Baumit acrylic finish
The second is a 20mm s&c in two coats with a Krend acyrlic finish
Has anyone done the above, if so whats the do's and don't's
Our concerns are regarding certification, due to the new building reg's over here you can get sued out the gate very easily.
Any advice would be welcome
The first one is a Kilsaran base coat with a Baumit acrylic finish
The second is a 20mm s&c in two coats with a Krend acyrlic finish
Has anyone done the above, if so whats the do's and don't's
Our concerns are regarding certification, due to the new building reg's over here you can get sued out the gate very easily.
Any advice would be welcome