richardbrown
Private Member
Hi Guys,
Just landed a job in Exeter on 5 schools.
Many moons ago they had a Marmorit 120mm rockwool system fitted, the rendering contractor at the time wrongly took the 120mm rockwool to the floor with no tray or cavity, of course over the years the rockwool has been soaking up the water and has blown the sm and conni.
I need to cut around the building to a height of 300mm, fit a tray and use eps and repair....simple enough.
I am looking for ideas on how to cut the insulation neatly, its 120mm with mesh,basecoat and 15mm conni.
Answers on a post card pls
Rich
Just landed a job in Exeter on 5 schools.
Many moons ago they had a Marmorit 120mm rockwool system fitted, the rendering contractor at the time wrongly took the 120mm rockwool to the floor with no tray or cavity, of course over the years the rockwool has been soaking up the water and has blown the sm and conni.
I need to cut around the building to a height of 300mm, fit a tray and use eps and repair....simple enough.
I am looking for ideas on how to cut the insulation neatly, its 120mm with mesh,basecoat and 15mm conni.
Answers on a post card pls
Rich