Recent content by putzparts

hi there are many makes and models for sand and cement you will need a diesel machine,if its for plastering a putzmeister sp11 or if its for floor screed you will need a putzmeister m760

give me a call got the genuine ones 07928917300

yes thank you as soon as you have the info e-mail me regards

Putzmeister SP11 TOP CONDITION any of you lads interested

im interested can you get him to e-mail me some pics,serial number,hours etc putzbits@gmail.com

yes its a diesel machine you want,Putzmeisters are usually the most expensive but the best in my opinion.the test is always when you are pumping over 40metres.the rotors/stators which are the parts that push the material through the hoses are in general the same but its the engine torque which...

yes there is a cheap option e-mail me on putzbits@gmail.com and i will e-mail you the manufactuers details its an air powered hopper gun will do thin coats down to paints

only economicial if you are pumping bagged material.if you are on a job that that bagged material and the supplier of the material is specified as ready mix is alraedy a lot cheaper than bagged material it would not pay when pumping it.if you are useing bagged material if you can save yourself...

no problem with supply of new or used putzmeisters or parts, that is the best of delaing with a long estabilished company.not always the cheapest but always there just let me know what you are after i have the contacts have you looked at the MP25 Putzmeister

what do you want to know about them?

yes as a pump hirer i have often in the past pumped onto pea gravel.you need good floor preperation,the floor you are pumping onto needs to be scabbled or blasted then primed with a good sealer/primer,apply stones and again prime following manufactuers instructions,let dry and then pump the...

Hi Spunky are you looking to purchase one ?if you had a machine what would you use it for?

warning to all electric machine users. you must use the correct protection when using electric machines,if you are powering a 3phase machine.start with an RCD unit at the source of power.ie insert an Rcd unit at the wall or into the generator.the machine you are using should also have its own...

plastering/rendering machines,electric or diesel require a level of skill at the end of the hose.there are single mixers or duo-mixers in electric,some renders need the twin mixing before they enter the delivery hoses.remember you can also do liquid floor screeds,grouting or fire protection...

putzparts :RpS_laugh: the best machine is a Putzmeister SP11,if you are going to be mixing/spraying a lot of material.it will do sand/cement,bagged render or you can do liquid floor screeds,electric machines are generally used for bagged materials where you can get close to your work,all...