currymunster
Latest activity Postings About
-
-
https://www.brianhyde.co.uk/store/productimages.aspx?n=TAY-27508&imagesize=extra%20large&timagesize=small&imageId=12914 Sorry I had the... -
For floating I go 1.5m Darby all over and then check and final with my 2.5m and 3m Ended up taking my handles off after a few years...
-
currymunster replied to the thread Shameful feather edge quality.I've never actually owned or used a Darby. Funny how we stick with what we know. Guy I learnt with didn't like them for some reason. I...
-
currymunster replied to the thread Shameful feather edge quality.That's okay, no dramas, I guess that if you haven't bought one in twenty years then you've not experienced the crap quality. Unless the...
-
currymunster replied to the thread Shameful feather edge quality.Hey, I looked at Taylor's, they are just a builders merchant selling tools. As per usual the description is very limited and the picture...
-
Actually a thread worth reading for a change!
-
Just so you know, the little blade is reversible - see the two bolts? Flip it and it's a square cut Just a piece of tool steel with...
-
The top one is shockingly thin but I don’t like the bottom one with the ‘rounded’ edge…shite for sharp-internals.
-
When I was doing acres of sand and cement float and set I wouldn't use that thing design of featheredge over about 1.2m. I used the much...
-
That's because you don't straighten f**k all.
-
currymunster replied to the thread Shameful feather edge quality.Not heard of Taylor's, I'll check them out, as far as the sharpness..... The photo makes it look worse, and if rather a slight radius...
-
currymunster replied to the thread Wide joint block effect.I looked at those but noticed they are a V blade and I needed a square joint. I've done the job now and just cut them out like a quoin...
-
Having been a plasterer for 30 years I have experienced some tools and their quality. For some time now I've been exasperated by the...
-
-
-
Hi, anyone done wide joint block effect. Like quoins but with a 40mm wide flat joint between them. Maybe about 10mm deep. I can do...
-
-
Loading…
-
Loading…
