Trying to remember what the sand was like. It's the only thing I can put it down to as the other walls are fine and that was with the different sand. All done at the same time as well.
I'm hoping I have some left over sand in the garage that I can you and check.
Yeah scratch was left for around 5 days.
Floated up then used a sponge.
Pulling the last of my hair out over this. Theres no blown areas so thinking about this bedec paint on one section to see if it works and go from there.
Cheers for all the replies!
There was a shovel of lime in the top coat and the wall is a South Westerly I did keep misting it through out the day and the following day!
The exact same mix on the other wall is fine apart from the sand which was still plastering sand but from a different merchants.
Need some advice from you guys on a sand and cement rendering job I did back in September.
All Old render was removed. Rendagrip applied. Then a scratch coat at 5-1 with waterproofer then once dry a top coat of 6-1 with febmix.
It has been painted with sandtex once dried.
Had a call saying...
I have used them Once when there was some thin glass doors around. I tied abit of cord to the hook then put a screw in a board and tied ya other end to that - so if it slipped then the prop wouldn’t fall very far away from me or worse go through the thin glass.
Not sure if it’s meant for that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.