THE20INCHLOVER
Member
Has anyone been on the Knauf training for this product?. Only hand applied for Keepmoat and barrets on plasterboard so any advice would be appreciated .
Has anyone been on the Knauf training for this product?. Only hand applied for Keepmoat and barrets on plasterboard so any advice would be appreciated .
Best tip for using mp finish. Mix it stuff that it just about comes out of the bucket. Fill beads and joints out first. Keep it stiff for the first coat. 2nd coat mix it like multi. Leave it longer in between trowels then u would with multi.You're correct it was mp finish not mp 75. There seems to be a bit of it going in the north west atm so Id like me and my team to learn it. The prices are pretty good so there. Must be a shortage of applicators up these parts. What's the market like were you guys are at? . I've spoken to my mate who uses it and he,s a fan... So that will do for me.thank you all for the advice its appreciated!!! Looks like were off to sunny Kent!
Best tip for using mp finish. Mix it stuff that it just about comes out of the bucket. Fill beads and joints out first. Keep it stiff for the first coat. 2nd coat mix it like multi. Leave it longer in between trowels then u would with multi.
Sorry yes mp75 mate but I did use the mp finish for all the ceilings and studs Walls at the same time and it's not bad gear. if spraying it do joints beads by hand then you can spray it in one coatThink Leeroy is referring to MP75....
It is a slightly different product now.
This thread is incorrectly labelled... it is MP Finish he is after training and assistance on.
Knauf universal plaster goes of quicker and isn't as gritty. Like mp75 but more suited for UK. Two hits a day easy with the Ritmo.Yeah I did it mate about 10 years ago when I had a G5, they showed me set up on machine and how to use mp75 not bad gear but tough to get 2 gauges and the m2 I needed, it works out longer sets,put it this way you won't be kicking a football around for 3 o'clock like the video shows. but if you can work a system on hand apply, you could maybe work a rolling gauge with the right team. But for me it's for machine apply in commercial
Universal is the stuff in wickes isn't it? And it sprays ok?Knauf universal plaster goes of quicker and isn't as gritty. Like mp75 but more suited for UK. Two hits a day easy with the Ritmo.
Next opitunity I'm putting this throughUniversal is the stuff in wickes isn't it? And it sprays ok?
That was a question not a statement! See how you got the wrong end.Next opitunity I'm putting this through
That was a question not a statement! See how you got the wrong end.
What you on about bender?That was a question not a statement! See how you got the wrong end.
That was a question not a statement! See how you got the wrong end.