User___removed
Well-Known Member
Can anyone recommend a good place to buy large quants of screws for knauf carrier board?
Cheers
Cheers
Encon.was thinking screw fix or taylor fixings would of been cheaper.Where did you buy the Aquapanel from mate? You should be able to get a good deal on the Maxi Screws from them..
Go with collated Bobby I couldn't find any so I did singles takes forever cost me a lot in wages[emoji19] as I'm use to using collated internally.Hi Bobby
Best thing to do is contact wherever you got the boards and ask them to price....
If you are going into timber, you can get the Knauf Aquapanel Exterior Maxi Screw SN39 now in collated strips - 1000 in a box.... works out cheaper and easier to install
By all means, give me a shout if you want to discuss further
Richard Lord
07918 766577
rlord@knauf.co.uk
Go with collated Bobby I couldn't find any so I did singles takes forever cost me a lot in wages[emoji19] as I'm use to using collated internally.
Heads up as well if you ever use render pro boards instead of Knauf you now need dpc on top of each lat, to comply regs
What collated stainless screws?Go with collated Bobby I couldn't find any so I did singles takes forever cost me a lot in wages[emoji19] as I'm use to using collated internally.
Heads up as well if you ever use render pro boards instead of Knauf you now need dpc on top of each lat, to comply regs
Of course mate but you try arguing them [emoji23]Would the screws not just puncture the dpc ?
Yes mate [emoji106]What collated stainless screws?
You need dpc where?Go with collated Bobby I couldn't find any so I did singles takes forever cost me a lot in wages[emoji19] as I'm use to using collated internally.
Heads up as well if you ever use render pro boards instead of Knauf you now need dpc on top of each lat, to comply regs
Just strips on top of the lats on contact with the render pro board mate it's new regs for the render pro boardsYou need dpc where?
What collated stainless screws?
I agree mate but I just got caught out with it and thought I would give everyone else the heads up, Knauf boards next time [emoji6]I don't get the need for DPC..... surely, this layer of DPC will get the dew forming on it and cause more problems than any potential moisture in a treated timber batten.....
I have seen this on the latest literature with systems using MGO boards... so must be a requirement for them?
Not a requirement with Knauf Aquapanel Exterior .......... Treated Timber Battens only.
Where from @Leeroy.Yes mate [emoji106]
Where from @Leeroy.