Yes you can, you will be leaving it too late to spatFirst time doing tc, got base coat on but it was tearing and dragging when spatting, can you leave it with a sponge float finish? It's for a mate, warned him several times I havnt done it before haha he's not bothered and wanted me to do it
Marvellous, thanks, I guessed it was leaving it too long, had formed a skin, some areas I wet with spray bottle then spatted but still wasn't happy with it.Yes you can, you will be leaving it too late to spat
Thin coat prob have covered it anywayMarvellous, thanks, I guessed it was leaving it too long, had formed a skin, some areas I wet with spray bottle then spatted but still wasn't happy with it.
First time doing tc, got base coat on but it was tearing and dragging when spatting, can you leave it with a sponge float finish? It's for a mate, warned him several times I havnt done it before haha he's not bothered and wanted me to do it
Thin coat prob have covered it anyway
float and sponge mate
Normal float ? Like you use for s+c ? It was fassa a96 I was using, things like chewing gum when hand applying
Normal float ? Like you use for s+c ? It was fassa a96 I was using, things like chewing gum when hand applying
1.5 will cover okAlways got the impression it has to be cock on, does thin coat cover more s**t then you think ? Always thought with it being put ok that thin it will show everything
Around 40sm I sprayed a good 30sm but he didn't order enough so couldn't do 1 side (around 10sm) which is the side we hand balled onhow big is the area
Ah sound, I should be ok then haha
Good job it's 1.5 then haha1.5 will cover ok
1mm less forgiving, but looks a bit better.
I didn't know they did 1mn1.5 will cover ok
1mm less forgiving, but looks a bit better.
I didn't know they did 1mn
Think that's what Iust of practiced with on back of garage. I free loaded a tub of brother-in-law. Always liked finish better
Hi, I’m a binman but I’m happy to dish out advice on something I know nowt about.
It depends who you ask It doesn't cover much if you ask me the flatter the better you have to catch the base coat right some people just spat it I personally power float it afterwards it looks much better but obviously takes twice as longAlways got the impression it has to be cock on, does thin coat cover more s**t then you think ? Always thought with it being put ok that thin it will show everything
It depends who you ask It doesn't cover much if you ask me the flatter the better you have to catch the base coat right some people just spat it I personally power float it afterwards it looks much better but obviously takes twice as long
It follows everything in my opinion some will say it covers I wouldn't you want the base as flat as possible regardless of how you get thereWhen I spatted it I didn't think it looked flat enough for my liking, just kept leaving lines, but then again I don't know how well tc covers any imperfections etc, so just ended up sponge floating it, he'd got some white base coat but realised he wouldn't have enough so orderd more but they sent him grey, the white seemed better to work with, sponged up fine and went of pretty quick, but the grey seemed to hang forever. Its all on now so will just have to see how it goes.
Yeah you can I sometimes do it's one of them things you can do loads of different ways the weather and gear sometimes push you one way or the otherHeard people say treat it like mono and I bar it back but I didn't have enough to do it that way