Hello all
I have an issue that I hope someone can offer advice on.
I had soundproofing installed in 2018 by the Local Council.
Two of the walls have issues with one wall not being level and the other, well, the finish was not good,
Both walls are Soundbloc 15mm Double Boarded.
My health has not been good and I have only just got to the point where I can look at getting this sorted.
I did contact the Local Council but they said since it had been more than a year since the work was done that they could not sort it.
I did get a Plasterer, who had good reviews, in to skim the walls but he did a poor job, making the walls worse in some respects.
He did not remove the coving and just skimmed up to it which has left a minimal amount of lip on the coving and also did not remove or even loosen the electrical sockets which has also caused problems.
Due to my health I am loathe to get the Plasterer back and also I do not want him to make the issues worse.
Needless to say, I am now looking at getting another Plasterer in to correct the issues, however, one worry, of many, I have is the Coving.
Since the Plasterer skimmed up to the Coving and left a minimal lip I think the Coving will need to be removed in order to re-skim, again.
When the Local Council did the work, on one wall the Coving was stuck on to a Plaster Skim but on the other it was stuck directly on to the Soundbloc Plasterboard.
.
Can anyone please advise how to remove the Coving particularly where it has been stuck directly to the Soundbloc Plasterboard?
Thanks in advance
Kevin
I have an issue that I hope someone can offer advice on.
I had soundproofing installed in 2018 by the Local Council.
Two of the walls have issues with one wall not being level and the other, well, the finish was not good,
Both walls are Soundbloc 15mm Double Boarded.
My health has not been good and I have only just got to the point where I can look at getting this sorted.
I did contact the Local Council but they said since it had been more than a year since the work was done that they could not sort it.
I did get a Plasterer, who had good reviews, in to skim the walls but he did a poor job, making the walls worse in some respects.
He did not remove the coving and just skimmed up to it which has left a minimal amount of lip on the coving and also did not remove or even loosen the electrical sockets which has also caused problems.
Due to my health I am loathe to get the Plasterer back and also I do not want him to make the issues worse.
Needless to say, I am now looking at getting another Plasterer in to correct the issues, however, one worry, of many, I have is the Coving.
Since the Plasterer skimmed up to the Coving and left a minimal lip I think the Coving will need to be removed in order to re-skim, again.
When the Local Council did the work, on one wall the Coving was stuck on to a Plaster Skim but on the other it was stuck directly on to the Soundbloc Plasterboard.
.
Can anyone please advise how to remove the Coving particularly where it has been stuck directly to the Soundbloc Plasterboard?
Thanks in advance
Kevin