What system would you recommend ? And I spray the top coatExpensive, but yes.
Well it's 1.mm and 1.5 that I will be using most .Like owls says.
They don't do 1.5 tho and they don't use silicone texture.
Well it's 1.mm and 1.5 that I will be using most .
And would like to try there mineral renders.
Any good? And are they easy to use. I am an experienced plasterer but haven't used the mineral renders
I ment thin coat system like parextherm mineral system I haven't used it before.Mineral as in ehi?
And how much experience of fitting ewi systems have you got? You can't be realistically looking at fitting a system like that without any experience if so you'll be getting a call back with water ingress down the line.
Thanks mateThey do a 1mm sand fine and they do a sand coarse looks like 2mm but is actually 1.8mm size. They don't do a 1.5 but I never had an issue. In fact sand coarse looks much nicer than 1.5 omo
Yes mate I did mean a thin coat mineral. I've never used it and would like to start using it.Think he means the mineral thin coat?
You would need to know the system before you start a job.jumpYes mate I did mean a thin coat mineral. I've never used it and would like to start using it.
Do I need to go on a course? Or would I pick it up easily ?
Thanks
There maite (base coat)is a cont to use
There maite (base coat)is a cont to use
ok thanks pal will look into itYou would need to know the system before you start a job.jump
In with a gang using it or a course would push you in the right direction.working with another firm for a week should help IF your a compitant plasterer