M
mrspoon
Guest
eurgh, i feel poo to say the least and ive got to go board a landing ceiling and make a start at skimming the H/S/L, on a sunday :
anyone else on the tools today?
anyone else on the tools today?
southernmonkey said:nope no sundays for me ......there'd need to be a big bag of cash for me on a sunday
Or pies mate eh a big bag of pies Mmmmmsouthernmonkey said:nope no sundays for me ......there'd need to be a big bag of cash for me on a sunday
You can, but the joint will be proud of the board surface.oasis said:can u do joint and tape with out useing a taperd edge? just line the tape over the 2 cuts and wack some muck on um and rub down the next day? is it that easy?
Most of my work is plasterboarding, machine taping & jointing, and coving.oasis said:sounds like you do allot of this work tony.. just intrest me.. i guess you need all the kit you cant just do it with an 8" blade..i guess from ceiling to wall and all is harder and u need kit for that?
i have some Knuf ready mixed tape joint stuff i use it for areas like very small ceilings in cupboards ect but i use plasters scrim tape.. so it takes 2 coats of compound.also the joint compound is reali good for filling any errors on fresh plaster it rubs of so easy the next day.
richardbrown said:Tony why is it on TE board the taper is only down the long edge and not all edges ... I have always wondered that !!!???
Rich
TonyM said:richardbrown said:Tony why is it on TE board the taper is only down the long edge and not all edges ... I have always wondered that !!!???
Rich
That would be a question for the board manufacturers Rich. I believe that you can get 4 tapered edge board in the US.