Spraying hp 14 from m200

[Snape01]

I have 200sqm job spraying hp14 from m200 what water setting is the best for this product please

 

[Ftp321]

I have 200sqm job spraying hp14 from m200 what water setting is the best for this product please

Don't understand these water setting questions everything plays a factor, speed, r&s wear, length of hose water pressure.
Just set at average and tweak to suit!

 

[Snape01]

Don't understand these water setting questions everything plays a factor, speed, r&s wear, length of hose water pressure.
Just set at average and tweak to suit!

Speed 3 r&s 80 bags hose 15 m does that help

 

[Snape01]

I’m new to the game put my hart and soul in to this and not going to give up I’ve bin on plastering 1 stop shop training but now at home it seems not to being going my way

 

[Ftp321]

Try speed 4 water 300 and tweak from there,
What water setting you been using on other material?

 

[Snape01]

Try speed 4 water 300 and tweak from there,
What water setting you been using on other material?

Used k1 at 290 on speed 3

 

[Ftp321]

Used k1 at 290 on speed 3

Try what I said and adjust to suit,
Hp14 needs to be only just holding it's form very wet, easier to work and more time.

 

[Plasterers1StopShop]

Off the top of my head, speed 3 water at 300.

Test out the bottom of the R/S before adding hoses.

 

[owls]

Don't understand these water setting questions everything plays a factor, speed, r&s wear, length of hose water pressure.
Just set at average and tweak to suit!

I've been using machines nearly 20 years now, and still learning with different material etc.

 

[Snape01]

Thank you all for the help sprayed today at 310 speed 3 went well spraying again tomorrow can’t wait but I will say hp 14 don’t like hot weather