S a plastering
Private Member
Plumber made large hole in silicone render whats best way too patch it back in cheers
Small patch silicone
- Thread starter S a plastering
- Start date
S a plastering
Private Member
Took the soil stack out so about 300x300 mate just the one patch
Tramp
Well-Known Member
Blend edges with a texture sponge by dabing it, take your time and you can't tell
S a plastering
Private Member
Brill cheers mate will a normal sponge do not sure what a texture sponge looks like
Tramp
Well-Known Member
Refina medium sponge float, just use the corner Just dab around the edge where new meets old, you can get it spot on,
S a plastering
Private Member
OK nice one
raytheplasterer
Well-Known Member
put a blank plate of some description over it, you'll never blend it in. or a vent plate
S a plastering
Private Member
But I've been told I can by tramp
raytheplasterer
Well-Known Member
post pictures of before and after.
John j
Mono Don
Make sure you got.grit on sponge not just paint
raytheplasterer
Well-Known Member
how will you stop a 300 x 300 repaired hole in a rendered wall from cracking, I'm assuming the hole goes right through the wall,
essexandy
The Lake Governor
Surely not scaffolders? They're far too careful of others work to do any damage.
Tramp
Well-Known Member
A vent cover Is a good call but but if can't be used, if concerned about shrinkage, then make the radius slightly bigger, knock skim coat back to mesh, use rendaid as base coat with new larger piece of mesh trowled in.
Tramp
Well-Known Member
Did a shop, looked like Spider-Man had been crawling around the walls, black handprints all up the Gable,
Boss said it was the lad he had been soaking the fittings in diesel on the morning,
Borstal's only educational program was scaffolding I'm sure of it.