sm700pro

Status
Not open for further replies.
A

andyphillips

New Member
Hi using sm700pro with connie top coat,this stuff is great to work with, spary it on with the g5 next week prime and connie .
Just seeing who spary it on as well any tips!!
 
its great stuff is sm700 its up there with maitie for me.if anything its composition is over the top really for what it does again like maitie.
 
I never bother spraying sm as you can get so much done by hand in a day its not worth the bother for me...

agree tis good gear!

Rich
 
as above, i find its not worth the hasstle spraying, and masking up etc.2- 3 of you can get a decent amount on.
 
I've sprayed maite and it's lovelly once your going. As you say masking,machine setup etc but to then spray a lift on from head to toe in a minute or so is very nice. Mesh just beds straight in one after the other because it's so fresh. Quick spat like mono, light shower with the hosepipe and a cross trowel with orange sponge and it's done. Second coat next day then by hand tight as.
 
what rotor you using on the G5 then ? ?

thought about lobbing a d3-4 on to slow it down and try maite through.
 
Status
Not open for further replies.
Back
Top