SBR slurry & fiberglass mesh,,, Help

[Dinky1970]

If I apply an sbr slurry ( 1 part sbr - 1 part water - 5 parts cement ) to an external wall and want to embed fiberglass mesh into the render would I apply it straight onto the wet slurry and then immediately apply the sand cement scratch coat ?

 

[vfr12]

That sounds right apart from the slurry ratio. I always thought is 1 part SBR / 1 part bonding/ 1 part water/ 1 part cement.

 

[Arti]

If I apply an sbr slurry ( 1 part sbr - 1 part water - 5 parts cement ) to an external wall and want to embed fiberglass mesh into the render would I apply it straight onto the wet slurry and then immediately apply the sand cement scratch coat ?

do you mean embed the mesh into the slurry ??

 

[Dinky1970]

do you mean embed the mesh into the slurry ??

yes if that's the right way of doing it??

 

[Arti]

what render are you gonna use

 

[Jgreenplastering]

The slurry is just a slurry the mesh wants to ideally go into the top 3rd of the render or the scratch coat.


Sent from my iPhone using Tapatalk

 

[Dinky1970]

ok thanks for that, that answers my question