s**t plasterboard

[Gilbert75]

I know I'm rough, but jeez, ive took it to another level now, try cut the board, they just crumble and snap, paper all tears off the back, don't matter what the make I've tried their all crap ..same some?

 

[Kinkyboy]

I know I'm rough, but jeez, ive took it to another level now, try cut the board, they just crumble and snap, paper all tears off the back, don't matter what the make I've tried their all crap ..same some?

You tried joinery?

 

[ChrispyUK]

I know I'm rough, but jeez, ive took it to another level now, try cut the board, they just crumble and snap, paper all tears off the back, don't matter what the make I've tried their all crap ..same some?

Think people have problems with the BG board. Usually buy Siniat or knauf and don’t generally have a problem. Luck of the draw sometimes and down to what your suppliers keep in stock.

 

[John j]

Think people have problems with the BG board. Usually buy Siniat or knauf and don’t generally have a problem. Luck of the draw sometimes and down to what your suppliers keep in stock.

Or put a new blade in knife

 

[Gilbert75]

Or put a new blade in knife

Every cut?

 

[tapit]

Every cuntfucking one?

naughty

 

[ChrispyUK]

Every cut?

yes. Japanese steel Can’t go Wong

 

[Gilbert75]

Think people have problems with the BG board. Usually buy Siniat or knauf and don’t generally have a problem. Luck of the draw sometimes and down to what your suppliers keep in stock.

Yesh, I know bg are s**t, but been using siniat last few week, normally spot on, but since been back after lock down, not found good board...

 

[Gilbert75]

yes. Japanese steel Can’t go Wong

True, all my kitchen knifes are jap

 

[essexandy]

Or put a new blade in knife

What not just resharpen the one in the knife?

 

[John j]

What not just resharpen the one in the knife?

You can only do that 650 times though

 

[John j]

You can only do that 650 times though

Anyway fatha @you round this neck of woods at week end

 

[TonyM]

Knauf paper comes away from the gypsum too easily. Wouldn’t want to dab them. Liking those Turkish boards though. Put a load of 35mm thermal ones up today. Bang on 1200mm and flat as f**k

 

[Deleted member 32554]

I know I'm rough, but jeez, ive took it to another level now, try cut the board, they just crumble and snap, paper all tears off the back, don't matter what the make I've tried their all crap ..same some?

Wickes / knauf never a problem

 

[essexandy]

Anyway fatha @you round this neck of woods at week end

No I was in Wickersley Monday, Tuesday and Wednesday.
That zombie is a right nice fella to have a few beers with.