rendering mesh

gooty

New Member
Any recommendations for rendering mesh?
Never used before and seen various makes starting from 140g/m2
Just want it in a thin internal wall render, then multifinish
 
Any recommendations for rendering mesh?
Never used before and seen various makes starting from 140g/m2
Just want it in a thin internal wall render, then multifinish
Get it from a render supplier not the cheap s**t of amazon
 
Krend green mesh thick enough to cut straight with stanley knife. Not the heavy duty type with wire in the mesh that's for EWI.
 
Any recommendations for rendering mesh?
Never used before and seen various makes starting from 140g/m2
Just want it in a thin internal wall render, then multifinish
try to go for 160g/m2 as that's better quality and it will make your life easier especially when you want to embed it into your skim coat! Go on ebay as there are quiet a few decent suppliers! and I wouldn't pay more than £40 a roll...
 
Thanks, but unfortunately I bought 140g/m2 this morning before seeing this post.
The idea was that it would be thinner?
The wall is chalk blocks with very little thickness to skim on, so I had an idea to paint with blue grit, then first coat as mesh with multi/bonding, then second coat just multi.
 
Top