Rendergun

[JBPlasteringmcr]

Anyone know what compressor?
where the best place to hire the compressor from?
how much approx. to hire the compressor?
for a rendergun.

 

[lucius]

You need one of them biggy ones that you tow, check the rendergun website it will tell you what PSI you need.

 

[JBPlasteringmcr]

Just checked it, how come the refina one doesn't need as many litres per minute but a higher bar?

 

[lucius]

Dont know

 

[goody]

Ask Leon on here from refina

 

[Refina]

Hi JB,

For spraying render with our render gun we recommend a 30cfm or one tool compressor. Should be able to get one from a local hire company no problem. We don't hire out compressors unfortunately, but can sell you one if you were interested.

Here's the link to the gun:

Render spray guns for sand, cement renders, lime mortars and plasters

and compressor (at the bottom):

Air compressors for spray painting and decorating, air chisels and hammers

Important thing with compressors is not the tank size, psi etc. cfm is what you need to look at, a 30 cfm compressor will displace 30 cfm of air and your usable air will be about a third less than that.

Hope that makes sense, let me know if you need any more info.

Cheers,
Leon