R10 primer

[User___removed]

anyone know roughy how much a 20kg tub of k rend r10 will go?
Being sprayed on also
Cheers

 

[Jrend]

probably about 40 metres depending on how thick you put it on. Yo cant water it down any as it is really runny.

 

[user_removed]

About 35-40

Don't leave it too long thought, you want to get over it within a couple of days of application.

 

[User___removed]

About 35-40

Don't leave it too long thought, you want to get over it within a couple of days of application.

Cheers mac
Why would that be out of interest?

 

[Rigsby]

Some of these liquid coating have been know to wash off in the rain so render over as soon as.

 

[user_removed]

Apparently if it's left on too long like a week or 2 it's pulled in and doesn't do anything when you do put render over it.

We were advised to apply it and try and get over it within a day or 2 and if not to re-apply.

Going over breeze don't water it down because it will just pull the lot in and I'd be tempted to give it a neat coat then possibly a very slightly watered down coat later in the day or early the next.

K-rend has opened up a little on us while drying on blockwork and I think it was possibly pulling in a little too quickly, but I know k-rend has a history.

This is just how we were advised to do it by k rend

 

[user_removed]

Goes through a hopper gun great thought.

Took us 20 mins to prime about 40m2.

 

[User___removed]

Cheers Mac
It's going on old red brickwork followed by gp mortar
Looks the same as microgobetis

 

[user_removed]

yes its bright green though.

been fine for us over brickwork as long as its not engineering bricks or any other smooth substrate.