I have a lad who has boarded up my unused chimney breast on ground floor.
He appears to have used just standard untreated timber for the battens and run one flush against the concrete floor. The plasterboard also runs down flush to the floor. My understanding is that you should be leaving a 20-30mm gap from the floor. Am I being just going over the top by asking him to rectify the issue? I'm not one to tell someone how to do their job
He appears to have used just standard untreated timber for the battens and run one flush against the concrete floor. The plasterboard also runs down flush to the floor. My understanding is that you should be leaving a 20-30mm gap from the floor. Am I being just going over the top by asking him to rectify the issue? I'm not one to tell someone how to do their job