Parex on durisol blocks - 128m2 -Oxfordshire

Roscoe

New Member
Hi, looking for an experienced renderer to help us complete our self build. 128m2 including openings (openings total 24m2). Mostly single storey. Ideally we are looking to have this machine applied and would prefer someone with experience of the substrate if possible.

We are approx. 20 mins from junct14 M4, 30 mins from Oxford. Job is ready now but as long as its done before winter I will be happy.

Thanks for reading.
 
There a Recycled wood chip block. There similar to an icf system, there getting more and more common due to cost and speed of construction.
 
There getting more and more common, there cheaper than masonry, go up quicker don't need to worry about frost etc, then with durisol you've got the environmental aspect to it, most of the block is recycled.
there the way forward.
 
There getting more and more common, there cheaper than masonry, go up quicker don't need to worry about frost etc, then with durisol you've got the environmental aspect to it, most of the block is recycled.
there the way forward.
Yeah I can see it's a move forward. Might crop up on an extension or two then.
 
And we are done. Thanks to everyone who took an interest in our job. Jamie and the guys from tech rend did a great job and we very pleased with how it has turned out.

Great forum, good luck to everyone for the future.

Ross

glad it all worked out :D
 
Top