Evening all. Not posted on here before. Just wonder if anyone can help me. I' ve done plenty of K-REND but have got a customer who wants Parex. The rep came out to spec it and it all sounds like a science lesson, I got 3 different substrates - new blockwork, cement board and old dash. If I was doing K-REND would be Hp12 then colour for block, HPX for aquapanel then colour. For old dash which is solid would powerwash down then sbr then a 3:1 sand cement to fill out with sbr in gauging water then HP12 and colour. With Parex I'm in the dark a bit. Is there a base coat for the Parex? I got all the spec and can probably find out myself but there's nothing like hearing from people who know what they're on about. Cheers
Parex info please
- Thread starter Cressy
- Start date
David stewart
Active Member
Just always sprayed it directly on to block no base coat don't get as much time straight ing as you do with krend turns quick
Runswithscissors
Private Member
Parex have a base coat called Maite....
If the Parex guy has been out and given you a spec, can you not ask them to provide you with all the data sheets for there products?
Think the applications will he similar as for K Rend, just different product names.....
Good luck
Rich
If the Parex guy has been out and given you a spec, can you not ask them to provide you with all the data sheets for there products?
Think the applications will he similar as for K Rend, just different product names.....
Good luck
Rich
David stewart
Active Member
Big difference with krend to parex to apply never seen it hand applied but can imagine what it would be like lol
user__removed
Private Member
Maite is equivalent to hp12
Monogris e (hpx) is basecoat for old substrates.
Microgobetis 3000 is similar to r7 primer, cover all your areas apart from board with this.
Monogris e (hpx) is basecoat for old substrates.
Microgobetis 3000 is similar to r7 primer, cover all your areas apart from board with this.