Paint for external piazza oven ?

johniosaif

johniosaif

Private Member
What paint would you use , ?
 

Attachments

  • Paint for external piazza oven ?
    B57C54E1-B0BF-4187-A2E0-B3AA6F405237.webp
    356.8 KB · Views: 196
  • Paint for external piazza oven ?
    334A92D1-A367-457F-84AE-4212EC7A0A28.webp
    200.4 KB · Views: 195
  • Paint for external piazza oven ?
    AE26F40B-D66A-4223-9AE6-46E1440743D0.webp
    190.1 KB · Views: 196
I would of thought any exterior masonry paint would be ok. It's not like a fire place where the heat is there over a longer duration but, I'm probably under thinking it and there will be a better product.
 
raggles said:
I would of thought any exterior masonry paint would be ok. It's not like a fire place where the heat is there over a longer duration but, I'm probably under thinking it and there will be a better product.
Click to expand...
The oven prior to plastering got very hot , whether the insulation reduces this by a big enough percentage I can’t say
 
johniosaif said:
The oven prior to plastering got very hot , whether the insulation reduces this by a big enough percentage I can’t say
Click to expand...
I've used stove paint loads of times on renovations for stoves but, never on masonry, tbh I'd be ringing a decorator centre and asking them. There are certainly fire retardant paints out there cos I've seen them used where peep's want to leave beams and boards exposed but, still meet fire regs.
 
raggles said:
I've used stove paint loads of times on renovations for stoves but, never on masonry, tbh I'd be ringing a decorator centre and asking them. There are certainly fire retardant paints out there cos I've seen them used where peep's want to leave beams and boards exposed but, still meet fire regs.
Click to expand...

That - as far as I know - is intumescent paint and it's retardant by swelling up when it's activated by heat.

That be no good at all.

 
raggles said:
A* good effort,
you could obviously be bothered to spend the time on Google unlike me. ;)
Click to expand...
I've used it before when a customer wanted a wooden kitchen ceiling

At the time, I didn't know what an intumescent seal was so I never thought any more of it.

Sort of put two and two together long time ago.
 
Last edited:
I've always thought for safety if nothing else that there should be a vented shell
 
I would have built the oven then left an inch gap after insulation and rendered the exterior with a few holes top and bottom, would be a lot safer
 
You must log in or register to reply here.
Back
Top