nickelarse
Private Member
got a job, approx 60m render, float finish, approx 20mm thick. have priced it for 2 coats, but was gonna use microgobitis and then ocr. have been using a lot of cpi recently in 1 and 2 coat applications and its had a bit of a tendency to crack.
firstly, has anyomne else had this with cpi?
what ocr is most cost effective and gives the best finish?
or would you stick with the cpi as its only £3.50 a bag? the cheapest i can get weber for atm is over £5
firstly, has anyomne else had this with cpi?
what ocr is most cost effective and gives the best finish?
or would you stick with the cpi as its only £3.50 a bag? the cheapest i can get weber for atm is over £5