Catfishhunter
New Member
Ok used to work at a decorative concrete manufacturing company, and we sold Marshalltown Hopper, guns and trowels.
I used to rebuild the old aluminum Marshalltown hopper guns, and over the 13 years I ended up with 2 tackle box’s of rebuild parts parts, still brand new condition.
Have been kept in the tackle box’s since company was sold in the 90’s
So now I would rather sell them on eBay or someepwhere else rather then toss both box’s of parts in a recycle bin.
I have small screws to the air stems tips that I used to rebuild with.
My problem is I don’t have the correct part #’s issued by Marshalltown to list them. I have tried the manf but was told they don’t have those old part #s
And I don’t know if these parts will fit the newer hopper guns. I had a job site injury 2 years ago and now am not allowed to work, and I hate to waste these parts.
I’m not looking to make a lot of $ on them just wanted to see if someone can use them, or knows if these will work in the newer guns.
If I had a parts page showing the schematic and part numbers of the hopper gun then I can give you a proper count, rather then saying ok I have 45 pieces of the rubber boot, or 30+ pieces of the Air nozzles.
I loved rebuilding these guns and used to Dona’s many as 3-5 guns a week and then they were swapped out to the techs who brought in non working guns.
Only parts I don’t have left is the aluminum sides, those were taken by my brother since he was using them on his jobs long after I was.
Any help or advice would be appreciated
Thank you for your time
I used to rebuild the old aluminum Marshalltown hopper guns, and over the 13 years I ended up with 2 tackle box’s of rebuild parts parts, still brand new condition.
Have been kept in the tackle box’s since company was sold in the 90’s
So now I would rather sell them on eBay or someepwhere else rather then toss both box’s of parts in a recycle bin.
I have small screws to the air stems tips that I used to rebuild with.
My problem is I don’t have the correct part #’s issued by Marshalltown to list them. I have tried the manf but was told they don’t have those old part #s
And I don’t know if these parts will fit the newer hopper guns. I had a job site injury 2 years ago and now am not allowed to work, and I hate to waste these parts.
I’m not looking to make a lot of $ on them just wanted to see if someone can use them, or knows if these will work in the newer guns.
If I had a parts page showing the schematic and part numbers of the hopper gun then I can give you a proper count, rather then saying ok I have 45 pieces of the rubber boot, or 30+ pieces of the Air nozzles.
I loved rebuilding these guns and used to Dona’s many as 3-5 guns a week and then they were swapped out to the techs who brought in non working guns.
Only parts I don’t have left is the aluminum sides, those were taken by my brother since he was using them on his jobs long after I was.
Any help or advice would be appreciated
Thank you for your time
