Multi

[Cockney1]

What we skimming on . I find finish worse on bg boards

Siniat boards.

BG boards are dog shite for everything!

 

[Casper]

I only use board finish or fast set PRO finish.

 

[essexandy]

Might have to invest in a sponge but quick question will the one I scrub my balls with work??

Maybe

 

[BryanJ]

Never liked multi, carlite finish could be a bit greasy at times, my favourite was grey board finish. The plaster up here in Scotland was grey both backing coats and finish I've often wondered why it changed to pink.

Racist.

 

[John j]

Might have to invest in a sponge but quick question will the one I scrub my balls with work??

Not if they match size of ye dick

 

[paulf]

Racist.

I'm much more than that, I hate everyone.

 

[Groove37]

Not if they match size of ye dick

Can you get 14 inch sponges

 

[John j]

Can you get 14 inch sponges

You washing @essexandy back

 

[Groove37]

You washing @essexandy back

I said inch not centimetre mate

 

[Kasper]

Stays greasy af for ages, I started slapping another gauge on whilst waiting for it to be right for hard trowel. On Average about half an hour it takes, but yeah we slowly coming to that time of the year again where going to early means rippled f**k**g shitty finish ...

 

[Monkey Boy]

Stays greasy af for ages, I started slapping another gauge on whilst waiting for it to be right for hard trowel. On Average about half an hour it takes, but yeah we slowly coming to that time of the year again where going to early means rippled f**k**g shitty finish ...

Mine always like that anyway

 

[John j]

Fatha @essexandy bout that we was on about few weeks back that was sound to use but didn't turn brown for about 5 hours after and it was warm

 

[hollybank]

Fatha @essexandy bout that we was on about few weeks back that was sound to use but didn't turn brown for about 5 hours after and it was warm

Eh

 

[John j]

Eh

Had some multi few weeks back text Andy after it had been on bout 4 5 hours and it had not turned anywhere. He said he had a pallet that did same

 

[hollybank]

Had some multi few weeks back text Andy after it had been on bout 4 5 hours and it had not turned anywhere. He said he had a pallet that did same

Ours was the same this week virtually 5 hrs to finish.

 

[Casper]

FFS I couldn’t be arsed with that. Get pro finish and do smaller sets. It’s super reliable

 

[Casper]

My local Jewson have stopped stocking it. Said it wasn’t poplular enough. I said well there isn’t many pro’s about.

 

[John j]

Ours was the same this week virtually 5 hrs to finish.

It was finished . Went a treat . Hardly any water . Just didn't turn brown for hours after

 

[essexandy]

Fatha @essexandy bout that we was on about few weeks back that was sound to use but didn't turn brown for about 5 hours after and it was warm

I feel rather concerned by the fact that I actually understood that
Yes I remember mate. To be honest my work is always finished before it's turning.

 

[Cockney1]

My local Jewson have stopped stocking it. Said it wasn’t poplular enough. I said well there isn’t many pro’s about.

 

[Casper]

True story. Happened yesterday infact, wee man.

 

[Sam4554]

Leave a handful of dishwasher salt in the water the night before to soften up, a handful per bag takes all the greasy ness out thank me later

 

[hollybank]

one coat and sponge came out today on board on an empty property!
What a difference less than 3 hrs to finish.
Managed to get two big hits on too.
I will wait to get slagged off.

 

[essexandy]

one coat and sponge came out today on board on an empty property!
What a difference less than 3 hrs to finish.
Managed to get two big hits on too.
I will wait to get slagged off.

Algeeman one coats all the time and just trowels it up, no sponge. Just fills out to beads, frames, tapered edge boards etc.
He reckons that BG should be sued for fraud for telling people that boardwork needs two coats.

 

[Casper]

one coat and sponge came out today on board on an empty property!
What a difference less than 3 hrs to finish.
Managed to get two big hits on too.
I will wait to get slagged off.

Ya dafty. I told you to get the pro finish.

 

[hollybank]

Ya dafty. I told you to get the pro finish.

It’s not arrived in our area yet!

 

[Casper]

It’s not arrived in our area yet!

Funny. I’ve been using it for months. Can’t get enough of it. Total game changer

 

[zombie]

Algeeman one coats all the time and just trowels it up, no sponge. Just fills out to beads, frames, tapered edge boards etc.
He reckons that BG should be sued for fraud for telling people that boardwork needs two coats.

Whats happened to him?...hope hes ok?

 

[Casper]

Whats happened to him?...hope hes ok?

He’s being pursued for his dodgy one coating

 

[malc]

Wckes have pro finish in stock. well worth the extra money.

 

[hollybank]

Whats happened to him?...hope hes ok?

Was thinking the same.
Come back @algeeman we miss you.

 

[John j]

Was thinking the same.
Come back @algeeman we miss you.

Pubs are open 24 hours in blackpool

 

[hollybank]

Wckes have pro finish in stock. well worth the extra money.

So how much could you put on realistically without getting in a mess?

 

[hollybank]

Pubs are open 24 hours in blackpool

Illumination s are on.

 

[Casper]

So how much could you put on realistically without getting in a mess?

1-1.5 bag. Depending on area. I usually knock a bag up for a small ceiling or an average lounge wall.