Maite alternative

[ankers]

Does anyone know a nicer product for cement board instead of parex maite. Tears like mad with a sponge and something that's a fast setter.
Thanks

 

[Plasterers1StopShop]

Does anyone know a nicer product for cement board instead of parex maite. Tears like mad with a sponge and something that's a fast setter.
Thanks

PRB Renomur or Fondisol

 

[Rossi46]

Does anyone know a nicer product for cement board instead of parex maite. Tears like mad with a sponge and something that's a fast setter.
Thanks

K rend HPX.

 

[Rigsby]

Every manufacturer does an equivalent like Webers is their Lac, K Rend HPX etc.

I found Maite the worst to use but I also stopped sponging, instead spat flat then next morning I use a rasp type trowel from pft North to get any lines out.

 

[ankers]

Every manufacturer does an equivalent like Webers is their Lac, K Rend HPX etc.

I found Maite the worst to use but I also stopped sponging, instead spat flat then next morning I use a rasp type trowel from pft North to get any lines out.

Which ones the best to sponge? Found lac tears a lot too unless you hit it right at the end?

 

[Rossi46]

Which ones the best to sponge? Found lac tears a lot too unless you hit it right at the end?

The really High Polymer renders for board will all tear. Just got to let them go a bit more.

 

[Rigsby]

A Rossi says they all tear or sponge up crap. I developed a technique of applying flat and smooth as I could wet and dealt with getting it smooth when set. More labour intensive but better results.

For arm ache I got the lab to do scraping and grinding, save yer joints wear out someone else’s lol.