plasterjfe
Private Member
I had my Genny back from service yesterday.
Today we run a spray but the Genny kept on cutting/stalling only for a split second but without losing ignition. Ie- it kept on going just about so we didn't need to start it every time.
The only thing I can think of and see is that the fuel seems a little restricted. The filter glass is almost empty a d is was always half full before.
When the Genny is running you can see the flow through the filter glass but its just a trickle.
The Genny would stall now and then on its own steam. But it stalled every time we turned the pump on what it needs an extra kick.
My thinking is that there is not enough fuel delivery especially when the machine demands and extra slice on start up of the pump.
I will take it back to the shop on Monday but just in case is there an obvious solution ?
@PFTnorthern @PFTwales
Today we run a spray but the Genny kept on cutting/stalling only for a split second but without losing ignition. Ie- it kept on going just about so we didn't need to start it every time.
The only thing I can think of and see is that the fuel seems a little restricted. The filter glass is almost empty a d is was always half full before.
When the Genny is running you can see the flow through the filter glass but its just a trickle.
The Genny would stall now and then on its own steam. But it stalled every time we turned the pump on what it needs an extra kick.
My thinking is that there is not enough fuel delivery especially when the machine demands and extra slice on start up of the pump.
I will take it back to the shop on Monday but just in case is there an obvious solution ?
@PFTnorthern @PFTwales
Last edited by a moderator: