EPS Quoins

[david jenkins]

Need quoin stones we have stone effect, bath stone, all types of cosmetic enhancements available huge range. You send photo we will recreate most sections in X.P.S light weight.
find us www.Thermalguard

 

[Jerseyboy]

Just started the main house EWI with quoins

 

[zolco]

Just started the main house EWI with quoins

Looks a tedious job

 

[Jerseyboy]

Looks a tedious job

It is mate but I like trying different things but won't be in a rush to do anymore

 

[zolco]

It is mate but I like trying different things but won't be in a rush to do anymore

Looks good mate

 

[vfr12]

Great attention too the small detail! I really like it. Please , don't take what I am going to say next as a criticism , more of advice to save your future problems. After the quoins are dried, put a pin through . And don't pin the rest of the boards as kingspan, the most popular method is 5 pins per board- 1in the middle and 4 about 100 mm of the edges.

 

[Jerseyboy]

Great attention too the small detail! I really like it. Please , don't take what I am going to say next as a criticism , more of advice to save your future problems. After the quoins are dried, put a pin through . And don't pin the rest of the boards as kingspan, the most popular method is 5 pins per board- 1in the middle and 4 about 100 mm of the edges.

I always put 5 pins per board and your right there are a few missing but I've pinned the corners and have stuck the quoins on first as they take a while to prep and finish. I have also stuck the boards .
I never pin the quoins as they get stuck with adhesive and ain't going anywhere once there meshedand finished.
And am always open to advice from otherers as that's how I've learned over the years

 

[vfr12]

Not where the boards meet. That's the way we do kingspan. EPS pins should be 100-mm off the edges of the boards.

 

[Jerseyboy]

Not where the boards meet. That's the way we do kingspan. EPS pins should be 100-mm off the edges of the boards.

View attachment 15309

Normally if I stick the boards I only put 3 fixings per board as the adhesive covered 40% of the board.
I have fixed these boards to keep the boards joints a flat as I can .
I know what you mean about regulations and fixing patterns but am confidant it will be ok

 

[Lastlaff]

I'm chopping a load of these poly quoins off tomorrow

 

[vfr12]

Normally if I stick the boards I only put 3 fixings per board as the adhesive covered 40% of the board.
I have fixed these boards to keep the boards joints a flat as I can .
I know what you mean about regulations and fixing patterns but am confidant it will be ok

That's all it matters

 

[Jerseyboy]

I'm chopping a load of these poly quoins off tomorrow

Whys that?

 

[Lastlaff]

They are on my house and I'm just looking for a clean sharp angle on my house. Yours looked brill mate

 

[Danny]

looks like a job that will be a pain but worth it in the end

 

[Gibbo]

Think you can get them prefinished

 

[Orangemachineman]

Nice work jersey[emoji106]


Sent from my iPhone using Tapatalk

 

[Arti]

It must be a tit on coating them up though?


Sent from my E2303 using Tapatalk

 

[Jerseyboy]

They are on my house and I'm just looking for a clean sharp angle on my house. Yours looked brill mate

It must be a tit on coating them up though?


Sent from my E2303 using Tapatalk

yeah it's a long old job but worth it when there done

 

[Arti]

Get some pics up marra. Bet it looks mustard all done

Sent from my E2303 using Tapatalk