Dot and dab help needed !

[Jake9101]

On an agency job and expected to dot and dab onto this there’s nothing to hold it any advice ! Seems impossible !

 

[Sitemonkey]

View attachment 77448
On an agency job and expected to dot and dab onto this there’s nothing to hold it any advice ! Seems impossible !

Get an edge over bead . Laser it to frame fix with tek screws . Slot the taper of the board in . Dab the steel . BOSH

 

[Smudger1]

Rip ply down self tap drill n screw to post and ct1 adhesive to frame sides too.
You could foam voids behind ply gaps. Fix p/board bead n skim ?

 

[spunky]

Gypbond it

 

[Dollar]

View attachment 77448
On an agency job and expected to dot and dab onto this there’s nothing to hold it any advice ! Seems impossible !

Tell that clown main con -tractor
Can not be done ,needs closers to frame @ cold bridging

 

[Sitemonkey]

Tell that clown main con -tractor
Can not be done ,needs closers to frame @ cold bridging

Doesn't work like that on site . No one gives a fuk and no ones got a clue . It's a free for all the site managers are bits of college kids and the only tool they've held is in the pants