Bubbles, lines appearing and plaster tearing when applying to walls.

[bearbramwell]

Well the title say's it all, this keeps on happening,and i can't find a solution anywhere.

 

[Dansouthcoast84]

Is it drying out too quick?

 

[kebab king]

Post a pic, is it just on 1 job or all the time.

 

[bearbramwell]

Kind of

It takes about 10 - 15 mins for it to harden a little.

 

[bearbramwell]

bubbles in plaster

Yeah, it's everytime.
i'll try to upload a pic for you

 

[johniosaif]

It takes about 10 - 15 mins for it to harden a little.

Rub it gently..

 

[raggles]

If it is 2 coat work ie float and set the bubbles could be due to the backing plaster being too wet ie not properly set and the lines again if it is 2 coat work make sure you aint got the nails in your devil float set too deep cos this will cause grinning which will appear as dark lines in the finishing coat when set. if it aint 2 coat work pictures of substraight and finish coat being applied would help us help you :RpS_thumbup:

 

[stuart23]

Possibly 2nd coat not on thick enough.

 

[stuart23]

Or waiting too long before applying 2nd coat.

 

[bubbles65]

Sounds like you're waiting too long getting your second coat on :RpS_thumbup: