Bad quality plastering??

[JackOfAll]

Hi guys, first message on here.

seems like a really useful forum so here goes with my problem…

had our bedroom plastered in November 20.
My wife then fell pregnant so the decorating was put off a while…

just done a mist coat on one of the walls and the finish is all lumpy bumpy. I did feel it a bit after he first done it but I just thought they wouldn’t be noticeable.

do we think there could be any underlying issues with this wall or is it down to the plasterers finish.

it is an exterior 1st floor wall on a 1906 cottage

 

[Badvok]

You have left yourself wide open on here with that opening statement!!
And had he skimmed straight on to render on that wall?

 

[smoother09]

Give over man a blind man with a blindfold on could of spotted that! I dunno if you girls at mumsnet are just messing around or what, look I apologised about what went off! No need to attack our forum.

 

[Bigstevehammer]

One underlying issue….your a mong..


Surely a wind up?? ‍

 

[Stevieo]

Hi guys, first message on here.

seems like a really useful forum so here goes with my problem…

had our bedroom plastered in November 20.
My wife then fell pregnant so the decorating was put off a while…

just done a mist coat on one of the walls and the finish is all lumpy bumpy. I did feel it a bit after he first done it but I just thought they wouldn’t be noticeable.

do we think there could be any underlying issues with this wall or is it down to the plasterers finish.

it is an exterior 1st floor wall on a 1906 cottage

Could you not afford any angle bead?

 

[S a plastering]

Fuk my lord no beads aswell deary me

 

[MakeItSmooth]

Hi guys, first message on here.

seems like a really useful forum so here goes with my problem…

had our bedroom plastered in November 20.
My wife then fell pregnant so the decorating was put off a while…

just done a mist coat on one of the walls and the finish is all lumpy bumpy. I did feel it a bit after he first done it but I just thought they wouldn’t be noticeable.

do we think there could be any underlying issues with this wall or is it down to the plasterers finish.

it is an exterior 1st floor wall on a 1906 cottage

Ermmm..... your username is 'JackOfAll', and you have dodgy plastering, but you claim someone else is to blame.

I'm trying to believe it wasn't you, but it's not easy.

 

[Stewie03]

Could you not afford any angle bead?

Maybe he wanted to keep the original features of the cottage and not have beads

 

[paulf]

Maybe he wanted to keep the original features of the cottage and not have beads

It's a feature wall, looks great with that £15 shite site lighting, it's a 10/10 for me.

 

[Stewie03]

It's a feature wall, looks great with that £15 shite site lighting, it's a 10/10 for me.

I quite like hows he's done the wall reminds me of the hotel I stayed at in portugal

 

[paulf]

I quite like hows he's done the wall reminds me of the hotel I stayed at in portugal

Win win, so all is good.

 

[ChrispyUK]

Looks like about half a mil of plaster on the ceiling apex. Scraped to death

 

[MakeItSmooth]

I reckon you should get the plasterer back in and tell him he's done a crap job and owes you a refund!

hope this helps