Hi there, looking for opinions on this please
I have an angle at the top of the staircase ceiling where it starts to slope downstairs. The angle is about 100-110 degrees but the surface is artex (no asbestos). The high spots have been scraped back but the surface is still bumpy n the bead will need set on.
Options i think i have
1. is free hand n make a new corner with bonding n set the stop bead as straight as i can n lay some scrim the other side to stop cracking
2. Flex out a corner bead as the angle isnt too far past 90 degrees and set it on with bonding.
Would both work? Or is one more reliable than the other?
Thanks in advance
I have an angle at the top of the staircase ceiling where it starts to slope downstairs. The angle is about 100-110 degrees but the surface is artex (no asbestos). The high spots have been scraped back but the surface is still bumpy n the bead will need set on.
Options i think i have
1. is free hand n make a new corner with bonding n set the stop bead as straight as i can n lay some scrim the other side to stop cracking
2. Flex out a corner bead as the angle isnt too far past 90 degrees and set it on with bonding.
Would both work? Or is one more reliable than the other?
Thanks in advance
