Advice please k-rend

[bingo]

Hi

Can you k-rend on top of k-rend?

Long story short- customer email stated stone red in colour,we done it in stone grey!!!

 

[theclemo]

yes u can

 

[owls]

depends on what the original substrate was, if it was standard 7 n blocks your prob alright, anything else your asking for trouble due to the weight on the block etc ,and the chance of delamination. anything happens with it and k rend will run a mile, use a primer first such as r7

 

[theclemo]

go over it with acrylic that is the best way out.

 

[Alexander]

it is possible to over-coat existing krend with another thin layer of k-rend - using our R7 acrylic bonding aid.

however, rendering onto a substrate such as a render carrier board this may not be possible since this type of render carrier may not be able to hold the additional weight of the render.