Search results

Took my brother in law down initially for training and he just wasn’t into the whole process so I rather ran before I could walk and expected everything to fall into place at some point but unfortunately that hasn’t been the case . I did a few jobs by hand initially and there turned out good ...

Got friends who won’t leave there 9 till 5 steady away jobs which is current climate I totally understand . It’s hard to get the right personal as I’m still getting my head round machine rather it sat in garage gathering dust just take the hit and move on

It’s a long story mate but top of bottom of it is don’t have the man power

K4 and generator for sale . Comes also with relevant pipes , water butt , spray gun etc and water butt . Only has one 10 metre spray hose . Machine has only had ten bags through it maximum and generator has only five hours on it so basically brand new as photos show . Also comes with...

Cheers Mate with my knowledge being very limited these tips are invaluable . Thanks

I have primed every time before use tho as this was stressed to me as a must .

Ok have seen a lot of different terminology on here like just starting to get grips with it all

So can you just squirt it in water chamber and pump it through worm and pipes during priming stage ?

Listening to that I should have bought one of them it’s seems so much less hassle than humping around a genie all the time , making sure got petrol etc having to run water through a barrel and leaving water pump on the time I was told . Your process sounds far more easier. I’m just going to...

Cheers Mcplaster wasnt told about covering head of rotor stator so that new to me . What’s squeezy ? Cheers

Was going to start doing average size jobs was the plan Tom

Was edging towards mono mtech machine at first just because of German engineering aspect. Do you think I’m made mistake Tom?

Was advised by p1st that this would most beneficial for my needs and it had the most power .

It’s a mish of different parts from what I can gather hopper is grey kaleta sprayed blue . Electrics is made from eze but it has no speed dial .

I won’t give up mate that’s for sure thanks for that

Or I you referring to water speed on flow meter I know you start of at 600 and gradually bring it down to the consistency you want ?

Cheers Tom much appreciated . Slow setting as in mixer speed . Don’t even think my mixer has speed variations as wasn’t told this on training and haven’t found anything in manual. It’s the f10 model

I know but you haven’t seen the size of my hawk

Did this one the other day hand applied so I will only get better once I’ve got to grips with machine

I appreciate that but if you are that brand new to the machine game would of thought it been formatted better after investing that sort of money I’m not having a go at Ryan he’s a nice guy who is very knowledgeable and we talked for several days about purchase . Just didn’t realise there was...

I realise that mate but that’s why I’m offering my free time to someone who can help me make the wrongs right but experience is everything I admit I f**k*d up .

Learning every time I get it out one way or another thought it would be easy but taken time to adapt I hold my hands up last time I had it out it jammed think that was because didn’t run water through render pipe first is this enough to block pipe sufficiently and stop mixer?

Give me £6000 and I’ll take a loss lol Only joking I never quit that easily mate Success is only gained through failure so I just keep going and going

Do apologise matey my humour wasn’t with me last nite . Watched countless videos and did some hand applied stuff so thought I’d bite the bullet and just go for it but definitely underestimated the skills required so hold my hands up mate that’s why I’m on here knowledge is priceless . I did take...

That wasn’t meet to be damming to p1s it’s just my honest opinion freedom of speech There will also lots of people out there who are satisfied with there purchase . Just my opinion

He

There’s another one I found even I know it’s not the right bead

I worked with someone ten years again just filling hopper up like and didn’t seem that hard But I’m got it wrong . But like I said before I won’t quit and I know I’ll be better than some out there when I’m finished as seen some bad work out there and know mine will be better once I come good...

Anybody else had problems with F10 or just me

I’ll get there no need to be a t**t

I’ll get mate no need to be a t**t

Middlesbrough

Got F10 from plasterers one stop

Like I said willing to work for nothing while I’m learning this trade if anyone need spare pair of hands in north east I’m up for it

Your totally right Tom . I agree that’s why I’m here asking for help

I have no doubts I’ll get it right eventually just could do with some training with local firm as I’m quite a good Plasterer just wanted a new venture and was bored with skimming

Probably right there mate but you can’t tell me you have encountered your fair share of problems when you first started .

Don’t mean to give you a bad reference just think there’s a lot to learn in 3 hours and think I was quite nieve but that’s also my fault . I won’t give up with machine but there’s so many things to think about .

Hi Think your training is quite poor if I’m honest considering I gave you £8100

Have do a few bits hand applied but need more practice if there’s anybody who wants free labour

Hi Guys. New to this place so take it easy cowboys. Bought of one them render machines the F10 from plasterers one stop the other week and thought half a days training with the machine what can got wrong . Did work with a guy 10 years ago and he made it look easy . Well I have struggled like...