Recent content by scottcurtis484

  1. scottcurtis484

    P1 d6 3 rotor

    Ayup guys anybody know how the p1 d6 3 orange twister rotor handles k1 silicone. Cheers for any info . Also usually use soft one works a treat .
  2. scottcurtis484

    generater messing up

    ayup pal iv checked the connections at the back seems to be ok no loose ones or damage ill double check tho for sake ... the machine jenny are like new quite esy to determine damage anywer but also new to machine life and problem cud be in front my eyes . nice 1 tho
  3. scottcurtis484

    generater messing up

    actually take it back not genny its machine ... not spining in forward mode and seems to trio genny as soon as start it up
  4. scottcurtis484

    generater messing up

    ayup iv had problem today with generator which runs fine no issue just wen turn on my machine it trips instantly . if any1 knows anything . much apprciated
  5. scottcurtis484

    air valve problem

    it was a regulater switch just before the air outlet needed adjust to work at lower pressure because i found out later a seal was worn a little bit when i submerged it in water i fixed seal and adjust the switch back to normal unfortunaly my friend was there to hep me out who knew wat to do tho...
  6. scottcurtis484

    air valve problem

    thanks for any info any1 can give
  7. scottcurtis484

    air valve problem

    ayup lads. anybody any clues why my air shut off on gun wen turning back on only sometimes re starts up the machine ... randomly sometimes starts otherwise need to press green button start manually . im using eze k4+ ....for me is a very good machine aswell very good performance other than this...
  8. scottcurtis484

    Terrible Rendering competition

    haha quality looks like gemma colins backside
  9. scottcurtis484

    training

    ayup mate.. just wanted to ask about the diff r+s i.e the one with tongues and claplable ones . at the moment im using one with a tongue and seems to be in a metal casing. the lads i got machine off got that 1 from p1. after the bits u pointed out to me in previous chats i have had the machine...
  10. scottcurtis484

    r + s info

    music to my ears mate cant wait to go to work
  11. scottcurtis484

    r + s info

    cheers mate very useful info for me there i have heard a few bad things about spraying silicone it can be a nightmare 40m2 and go funny. iv got a couple parex jobs to do atm so hopefully it runs smooth . thanks tho big bish
  12. scottcurtis484

    r + s info

    do 2 coat in this wet mix flaten 1st and leave to pick up on 2nd before ruling it is wat im aiming far nice and wet .
  13. scottcurtis484

    r + s info

    thanks pal good sense talk there . i did have it really wet iv just got home today from rubbing yesterdays and found some chunks of bag in the wall maybe this jammed it up ? but thanks for tips m8
  14. scottcurtis484

    ayup guys

    im not sure about trap door not seen 1 be good tho to have 1
  15. scottcurtis484

    r + s info

    i put it reverse mode listening to a friend who didnt know what he was saying tbh .. i spoke to andy from p1 very helpful it cliked a few things from past experiance. used a ritmo l before and think i do need the training for the k4 .
Top