Recent content by RLPD

Members online

  1. R

    Is the Permagard failing?

    Thanyou for your help!!! The bathroom is all finished a no sign of any problems.
  2. R

    Is the Permagard failing?

    Thank you for this, I haven't had much experience with Damp and it quite daunting when you're renovating a flat and the client asks why the bathroom is lagging. I'll get back in Monday and tear away the tape. Put a roofing batten down and re-dab on top of that. Couldn't thank you enough!
  3. R

    Is the Permagard failing?

    So when the permagard is installed it’s pinned to the wall with the plastic plugs with the seals to prevent damp coming though right? What’s to stop damp coming though the gap at the bottom where the permagard meets the floor? I’m not questioning you, I’m just trying to understand the system...
  4. R

    Is the Permagard failing?

    And no there is not drainage channel. I’ve also used the fleece strips to keep the bottom of the permagard tight to the wall to prevent movement for the dabs. I take it this should be removed for airflow as well?
  5. R

    Is the Permagard failing?

    Thankyou buddy, that would be a great help to me
  6. R

    Is the Permagard failing?

    So the wall and floor has completely dried out after cutting away the bottom 400mm of the wall
  7. R

    Is the Permagard failing?

    They may be a stone wall backed onto one of the external walls. The other side of the door lining in the picture still has the old Newton lath with a grey undercoat and skimmed. There are no problems on this wall.
  8. R

    Is the Permagard failing?

    I think it’s cavity but can’t get access to behind the wall yet. I’ll be investigating today.
  9. R

    Is the Permagard failing?

    Hi, Started a bathroom renovation a few weeks back and noticed some tiles on one of the external walls was bowing so decided to investigate as the tiles needed to come off anyway. The old Newton lath circa 1970s (Which I was told on here) has perished but didn't seem to be any damp coming...
  10. R

    Old damp proof membrane perished.

    So we have cut away the plasterboard 400mm from the floor all the way around the external walls. The plaster hasn’t properly dried out and it had been a week since plastering. There is moisture in the internal side of the permagard membrane. Would the plaster and dabs create moisture on the side...
  11. R

    Old damp proof membrane perished.

    If it has returned, and let's say the waste to the toilet has been properly sealed. is this fillet seal in conjunction with their tanking potentially solve the problem. https://www.permagard.co.uk/permaseal-fillet-seal
  12. R

    Old damp proof membrane perished.

    Ok, Thanks, I will go around the bottom and clean it up. I've put a heater in that corner and it has seemed to of dissipated. I'm back there Monday so will see if it has returned.
  13. R

    Old damp proof membrane perished.

    Was skimmed on Monday.
  14. R

    Old damp proof membrane perished.

    Hello again Permagard Installed, Dabbed and limes but this damp patch In the corner of the room is a bit worrying. Before the original wall came down there was a small are already like this but presumed it was the perished Newton lath. Any suggestions? Does this mean I have to dig up...
Top