Recent content by hobbit87

Bobski well know idiot

Literally wetting my pants good stuff mate..idiots forum is maybe what u shud join as maybe you don't have any knowledge worth sharing

cheers

Hi all, just had same peal grey Hairline cracks...Full mesh over rendaid...first cracks in my time and been same system for years and don't know what to say to customer or how to fix it.. any advice welcome... piss take good also but any help guys???

awful I turned up to s Portch skim once it was make good multi there absolute shite

Looks good,Definitely worth spraying I think, I do 2 decent hits most days and it's hard on the body, shame u can't do ceilings but walls is z good start

Thanks guys, so will any indoor product go through my eze k4? Just sick of the hwk n trowel

OK thanks for the info I'll need another machine then

Thanks vincey, I will give the thistle spray a go first as its the cheaper product I belive, and cool so only walls can be sprayed didn't know that one, thanks, just

Thanks vincey, I will give the thistle spray a go first as its the cheaper product I belive, and cool so only walls can be sprayed didn't know that one, thanks,

Hello all, I wish to spray indoors with my eze k4 I am new to this method,but am a time served plasterer. I wanted to find out best product for indoors that's most cost effective and gives a finish that's acceptable, anyone used thistle spray finish with good results?

Hi, I find using a angle grinder to cut lines In wall every 2 inches or so; will weaken the old plaster/render ready to use a sds drill to remove

Sorry moving sideways on all lifts rather than lift at a time leaves longer dry line

If I was hand applying I'd have a man on each lift so you can controll the dry line by all moving across together, but with machine and hose maybe difficult to do, by hand u can go a meter on each lift at the same time moving sideways rather than up or down, hope this helps somehow

Thanks never knew the 2 hour rule handy to know that one to back yourself up in those situations, most render looks bad with sun at the side no matter how good u are ! Apart from k render that's been same day scrape with i bar I can get that pretty good with sun on it,all down to the ruling off...