Recent content by drakie

Kingspan man admited full responsibility .paper on back to smooth because it was applied whilst board too warm.they are exchanging all boards and paying for boards allready fixed to be taken off and replaced with new ones..

Kingspan rep coming to site today to resolve problem(yea right)let you know what he comes up with

Madmonk dots ok touching boards plenty just not staying stuck you can just see outline on board where adhesive been paper stil intact

Oh!!!bet it be good if you drew 1to 20 put some circles on it and hey up you got a dart board that big you couldn't miss

Tried that flynnyman didn't work thanks anyway appreciated.what do you mean spunky

Only bin doing this job 30 odd years and just realised bin putting boards wrong way round thought it was a bit difficult to skim that funny spongy side cheers spunky

It's a200 year old building as you can imagine its all over the place

The worry about that would be once the required three plugs (according to spec) fixed and props moved is it going to stay stuck with only three plugs .again builder don't like extras.

Yes know what you what you mean driwall wet enough .bondit would work I think but builder not going to pay for extras which that would be a lot considering we've got 350 of them to stick thanks for reply

Got a problem sticking k17 thermal boards. Using knauf bonding compound onto stone walls dots stiking ok to stone before getting chance to drill and plug them the boards are coming clean off adhesive leaving dots on wall paper on back of boards clean as a whistle ....any suggestions .

get a stainless steel one:RpS_thumbup:

use his best saw to cut plasterboard that pisses em off

aye up duc

just about to for the first time drop a load of flyers to houses in my area trying to drum up some work just wondering anybody ever done it if so was it worth it.

Isnt bond it made for any bg product ..he say,s he as got driwall allready surely he can use that.