one stop plasterers shop site?

[boardfinished]

i cant get on it for some reason

Not Found

The requested URL / was not found on this server.

Apache/2.4.18 (Unix) Server at www.plasterers1stopshop.co.uk Port 80

 

[raggles]

Been like that for three days Ryan mentioned they were having problems a few days back.

 

[User___removed]

That's because you follow Utd.
Good result today

 

[Marshy]

That's because you follow Utd.
Good result today

People in glass houses should not throw stones young Robert. I see your team are doing well also

 

[gps]

I usually get "not in stock"

 

[User___removed]

People in glass houses should not throw stones young Robert. I see your team are doing well also

To true marshy
I just remember that @boardfinished being a utd loving c**t

 

[boardfinished]

That's because you follow Utd.
Good result today

 

[Plasterers1StopShop]

I usually get "not in stock"

Sorry mate. We only sell the most popular and best products to the UK market - demand says it all

Sadly the site is down due to servers, killing me, but hoping it will be on soon.

Hope you have all had a good weekend

 

[Marshy]

Sorry mate. We only sell the most popular and best products to the UK market - demand says it all

Sadly the site is down due to servers, killing me, but hoping it will be on soon.

Hope you have all had a good weekend

Lets hope we smash Italy today

 

[GypsumSnorter]

Yeah I couldn't get on earlier - been checking and waiting for the 2100mm dropcloths for aaaages now..?

 

[Danny]

back up now... I should think your hosting provider is sacked now...

 

[GrantyBoy]

Sorry mate. We only sell the most popular and best products to the UK market - demand says it all

Sadly the site is down due to servers, killing me, but hoping it will be on soon.

Hope you have all had a good weekend

I find it hard to believe that demand is outstripping supply on plastering tools, it's not the housing market we're talking about it's plastic trowels and buckets.

 

[Danny]

I find it hard to believe that demand is outstripping supply on plastering tools, it's not the housing market we're talking about it's plastic trowels and buckets.

They can only be made at a certain rate

 

[zolco]

I find it hard to believe that demand is outstripping supply on plastering tools, it's not the housing market we're talking about it's plastic trowels and buckets.

I take it depends on how much money they pour into it and what's the minimum order from the manufacturers, they might not send a dozen out as not cost effective. But I could be completely wrong.

Sent from my Nexus 6P using Tapatalk

 

[Plasterers1StopShop]

I find it hard to believe that demand is outstripping supply on plastering tools, it's not the housing market we're talking about it's plastic trowels and buckets.

You would be very surprised with the demand for products. We use 4 huge companies in Europe who make all of our tools. They have said this is the busiest they have ever been for the UK market

 

[Plasterers1StopShop]

Yeah I couldn't get on earlier - been checking and waiting for the 2100mm dropcloths for aaaages now..?

Our container arrives on the 20th, they should be in stock on the 24th

 

[frankk]

Ive had dealings with them, good to deal with, never had a problem.

 

[hail hail]

I usually get "not in stock"

I've been getting this since Xmas

 

[User___removed]

Let's be honest some tools on the market now are a waste of money.keep it simple

 

[Plasterers1StopShop]

I've been getting this since Xmas

Loads of products arriving shortly mate, sorry for the delays

 

[hail hail]

Let's be honest some tools on the market now are a waste of money.keep it simple

Like what?

 

[User___removed]

Speed skim,plastic trowels to name a few

 

[theclemo]

Speed skim,plastic trowels to name a few

The blue speedskim is good. EZE spat good. The rest is s**t.

 

[User___removed]

I've been using a refina s*p*r*lex lately and must say its a decent trowel

 

[GrantyBoy]

The NElA! s*p*r*lex! bubble is bursting. It was good at the start as a new shiney toy but as time goes on you realise the benefits are marginal (if any) and it's left in the van for majority of jobs now.

The EZE spat is brilliant though.

 

[Plasterers1StopShop]

The NElA! s*p*r*lex! bubble is bursting. It was good at the start as a new shiney toy but as time goes on you realise the benefits are marginal (if any) and it's left in the van for majority of jobs now.

The EZE spat is brilliant though.

EZE Spat went through a stage on here where people couldn't see benefits either and some disliked them thinking they didn't perform well.
Its the same with all products, some will see benefits - others wont.

The NeLa range (when in stock) still sells unbelievably well, the Premiums are selling better than ever

 

[BigK]

The blue speed skim ( never had any other) is an absolute delight for flattening, especially ceilings, same goes for eze spat for finishing.


Sent from my iPhone using Tapatalk

 

[Vincey]

The NElA! s*p*r*lex! bubble is bursting. It was good at the start as a new shiney toy but as time goes on you realise the benefits are marginal (if any) and it's left in the van for majority of jobs now.

Can't say I agree with that love um or hate them,refina,nela both are flex trowels it's either one or the other if any you like .
Think all trowels are of use to different people
I not used my supaflex for a couple of days but today I did.

 

[User___removed]

I just use my rendering spat to flatten
Think it's a putz From piss

 

[theclemo]

I get on better in the summer with the s*p*r*lex then the winter. Mt I get on with all the time

 

[Danny]

I get on better in the summer with the s*p*r*lex then the winter. Mt I get on with all the time

I have seen this mentioned previously wonder exactly why thats the case??

 

[theclemo]

I have seen this mentioned previously wonder exactly why thats the case??

I don't know. And I have left the skim as long as you possibly can before trowelling it with the s*p*r*lex. I did a test on a wall in my shad one half s*p*r*lex one mt. I let it dry out painted it. I put a light down it and the MT looked a lot better finish. U should try this out Danny. I used to love the s*p*r*lex on till I discovered this. And the plastic is worse.

 

[Danny]

I don't know. And I have left the skim as long as you possibly can before trowelling it with the s*p*r*lex. I did a test on a wall in my shad one half s*p*r*lex one mt. I let it dry out painted it. I put a light down it and the MT looked a lot better finish. U should try this out Danny. I used to love the s*p*r*lex on till I discovered this. And the plastic is worse.

I think I need to get a unit and have a play as I think its quite interesting

 

[GypsumSnorter]

Our container arrives on the 20th, they should be in stock on the 24th

Superb!!

 

[User___removed]

I don't know. And I have left the skim as long as you possibly can before trowelling it with the s*p*r*lex. I did a test on a wall in my shad one half s*p*r*lex one mt. I let it dry out painted it. I put a light down it and the MT looked a lot better finish. U should try this out Danny. I used to love the s*p*r*lex on till I discovered this. And the plastic is worse.

I've bought a s*p*r*lex recently and think it's a decent trowel to use for cross trowel
I've tried it on 2nd trowel and think it's not good
There's been guys on here saying it saves times but if your getting on it earlier your asking for trouble
I said this 12 months back also