Cheapo screwgun

Members online

Total: 626 (members: 10, guests: 616)

Share this page

Status
Not open for further replies.
Nisus

Nisus

Elite Member
Bought this in France last year for a laugh it was only €29 :RpS_biggrin:
Anyway it's feckin great :RpS_thumbsup:
Just need to change the plug now :RpS_cool:

photo_zps2b23fdb8.jpg
 
I used to have a concept one. It was great. My gaffa was jealous so went to macro and got one lime that. £14 lol. He put a whacking great flymo lead on it. Brought it in. Tried it oncr and binned it lol
 
Lol, I remember seeing an auto feed attachment for cordless drills in Argos catalogue. :rolleyes)
 
A boarder on a big refurb we did a while back had one from Aldi about £30 i think and its was shizzel..............:RpS_thumbdn:
 
least now he can upgrade the trowhat with screws instead of gaffa tape......................:RpS_thumbup:
 
That happens if you press it down onto a wall say alittle bit and it clicks to the next screw , which u try to put in and the screw that u missed and is still in the strip and gets wedged into the mechanism ive been lucky once got it out by unscrewing it out its the only way i can see that happening
 
Still use a good cordless and a pouch full of screws ! Loads quicker in the end and you can retract them when the joists have run out lol .
 
Plasmaniac ad eat u alive at screwing up boards like if ur by hand and am using me autofeed soo sooo much faster than when i never had one had me off a number of iobs well ahead of time as id priced to board it at the old amount when i was using a normal drill , have me prices went down now ........





















































u must be mad
 
plasmaniac said:
Still use a good cordless and a pouch full of screws ! Loads quicker in the end and you can retract them when the joists have run out lol .
Click to expand...

Its a quid a miss if ya miss the joists on my jobs.............................Dont think ive bought a breakfast for months thanks to this nice little earner........................:RpS_thumbsup:
 
how much did you have to pay them arti when you scraped that ceiling back off then, if it a quid a miss it must be more for facking up the plastering
 
Artisan998 said:
Its a quid a miss if ya miss the joists on my jobs.............................Dont think ive bought a breakfast for months thanks to this nice little earner........................:RpS_thumbsup:
Click to expand...

Come & work with me marra :RpS_laugh:

photo_zps22644399.jpg
 
Maybe it's just me but I've never bought a screw gun. Always stuck with me cordless.
I always found that when doing skim work for builders their screwgun would put the screws too far in or not enough leading to the screw head plaster pop(not musical either)
I always assumed it was because the wood has different density that the torque settings could not alter too??? Just a guess.
 
CTPlastering said:
Its a depth gauge thougb not torque jus drive the screw it till the machines hard up
Click to expand...

That would make more sense. Then why is it whenever I do a job following some one thats used one the screws are never perfect.
some are okay but the majority are past the paper and IN the plasterboard or not in enough so the board can be pushed up by 2mm sometimes more.
Is it user error?????
 
CTPlastering said:
Plasmaniac ad eat u alive at screwing up boards like if ur by hand and am using me autofeed soo sooo much faster than when i never had one had me off a number of iobs well ahead of time as id priced to board it at the old amount when i was using a normal drill , have me prices went down now ........





















































u must be mad
Click to expand...

You could be right, but I reckon Plasmaniac would whoop your arse in a spelling test!

.... just sayin' like! :RpS_biggrin:
 
currymunster said:
That would make more sense. Then why is it whenever I do a job following some one thats used one the screws are never perfect.
some are okay but the majority are past the paper and IN the plasterboard or not in enough so the board can be pushed up by 2mm sometimes more.
Is it user error?????
Click to expand...

Because they're to ******* stupid to adjust their screwgun properly.
 
DMA said:
You could be right, but I reckon Plasmaniac would whoop your arse in a spelling test!

.... just sayin' like! :RpS_biggrin:
Click to expand...

Why did u spell saying sayin' ? Not proper english terrible would probably be easier to put a g ! And to be honest i didnt know i had entered a spelling test
 
no i mean ive used a couple of times cos they are wnnk
your right about the plastering though ive give it up pal my arms are fncked so giving it a rest till they are better, tell ya what too its amazing not to have all the hassle of looking for jobs, pricing them up dealing with customers and all that sh1t :RpS_thumbsup:
hope to be back on it some time next year though just in time for when the good days coom back :RpS_thumbsup:
 
NPS said:
no i mean ive used a couple of times cos they are wnnk
your right about the plastering though ive give it up pal my arms are fncked so giving it a rest till they are better, tell ya what too its amazing not to have all the hassle of looking for jobs, pricing them up dealing with customers and all that sh1t :RpS_thumbsup:
hope to be back on it some time next year though just in time for when the good days coom back :RpS_thumbsup:
Click to expand...

Lazy fcuker
 
Status
Not open for further replies.
Top