render system over a painted house???

[Kippax]

hello all
Just need some advice about using a meshed thin coat system over a painted house.
The house has a few fine cracks but the render is hard and solid.
Is there a product out there that will suit my needs.
And any good stabilizers or bonding agents to be recommended.
Also has anyone primed a painted house and sprayed a silicone 1.5 mm????

 

[Rigsby]

Take it you are talking about a thin coat system over exister render that is painted? Make sure the paint is clean?

 

[Kippax]

Take it you are talking about a thin coat system over exister render that is painted? Make sure the paint is clean?

Yes mate a thin coat system I would fungaside and power wash first

 

[Kylewesley]

Parex do a renovation render.. Good system!

From what I believe acrylic on lime render is no good??
Correct me if I'm wrong

 

[Kippax]

Parex do a renovation render.. Good system!

From what I believe acrylic on lime render is no good??
Correct me if I'm wrong

Thanks but I don't want want acrylic on lime render it's just a thin coat system advice over paint

 

[Kylewesley]

What material are you going to use?

 

[Kippax]

What material are you going to use?

Was thinking Jub jlm20 with mesh and 1.5 mm silicone

 

[Dansouthcoast84]

Was thinking Jub jlm20 with mesh and 1.5 mm silicone

We use jub jlm and silicone 1.5mm on refurbs.

As said.above make sure substrate is sound and paint isnt flaky etc. Maybe a quick scabble first.
we have mushroom pinned our mesh coat aswell before which is an option

 

[Kippax]

We use jub jlm and silicone 1.5mm on refurbs.

As said.above make sure substrate is sound and paint isnt flaky etc. Maybe a quick scabble first.
we have mushroom pinned our mesh coat aswell before which is an option

Ok mate thanks will give it a go

 

[Ivor]

What size beads to you use with the base coat ? Cheers

 

[Rigsby]

6mm

 

[owls]

Parex do a renovation render.. Good system!

From what I believe acrylic on lime render is no good??
Correct me if I'm wrong

The parex base render called parinter is a lime based render anyhow.

 

[CTPlastering]

Maite is lime aswell is that right owls ?

 

[CTPlastering]

Used them both and they seem very similar , just one has a magic touch to go onto paint lol

 

[Kippax]

Right lads so which is the best?
Should I sack the Jub jlm20 and 1.5 silicone and use the maitre????

 

[Kippax]

I mean maite

 

[User___removed]

Maite isn't made to go over a painted surface.its a basecoat as is jlm20.if pinned back it will be ok though.
Parinter is lime based and is for a sound painted surface.

 

[Kippax]

Ok thanks bobby I will go with that then

 

[plasterjfe]

Thanks but I don't want want acrylic on lime render it's just a thin coat system advice over paint

The thin coat render used for stable paint is lime based and the finish usually is acrylic. That's what it is.

 

[plasterjfe]

Maite is very high polymer it only looks like parinter but its properties and spec are different

 

[Kippax]

Ok thanks for the info it's all very helpful

 

[CTPlastering]

Maite is very high polymer it only looks like parinter but its properties and spec are different[/QUOTE

Cheers , just seemed very similar stuff obviously new they had different stuff in them thou lol thanks for the info