scottcurtis484
Member
which is best r + s for k4 to use with k1 silicone and monerex gm also ? anybody enlighten me plz
Can’t touch owt PFT. Dems d rulesIf @Plasterers1StopShop sold ritmo parts id use them hint hint nudge nudge
Can’t touch owt PFT
They sold the d63 and mixing shafts for years before the k4 came out or am i wrong
nice 1 palD6-3 soft for k1
D 6-3 twister for parex, or the P1 twisters are very good.
If @Plasterers1StopShop sold ritmo parts id use them hint hint nudge nudge
which is best r + s for k4 to use with k1 silicone and monerex gm also ? anybody enlighten me plz
Genuine PFT?Great news - we do mate Rotors and Stators in stock
ok sound i have that installed at the moment .. today was 1st day of using that machine(k4) it all went smoother than expected is ther a instruction booklet available as i need to know where things like filters are and other little bits .The standard D,6-3 P1 from Plasterers One Stop Shop will do all materials. No need for the soft mate
i bought machine 2nd hand but is like brand new new modelok sound i have that installed at the moment .. today was 1st day of using that machine(k4) it all went smoother than expected is ther a instruction booklet available as i need to know where things like filters are and other little bits .
Genuine PFT?
ok sound i have that installed at the moment .. today was 1st day of using that machine(k4) it all went smoother than expected is ther a instruction booklet available as i need to know where things like filters are and other little bits .
i bought machine 2nd hand but is like brand new new model
yes mate say p1 k4 plus edition on it payed 6500 for job lot like newWhat colour is it? Is it the new Blue K4 +?
top man .. i know im wingin it more than id like to i should come down . id much apprciate the advice on filters as today it did go wrong at the last couple m2 and as can imagine i was doing allsorts and render did at 1 point go in to flow tube
Ryan ill call today. Give your ritmo r and s a go. Do you do the b 4-2 ?
i put it reverse mode listening to a friend who didnt know what he was saying tbh .. i spoke to andy from p1 very helpful it cliked a few things from past experiance. used a ritmo l before and think i do need the training for the k4 .
do 2 coat in this wet mix flaten 1st and leave to pick up on 2nd before ruling it is wat im aiming far nice and wet .If youre jamming up the machine you are probably not starting off with enough water in the pot, and or spraying far to stiff.
If you could hand apply what comes out of the machine, its too stiff. You should be able to spray a panel and have at least 20 mins before you can rule if off.
Will have less wear and tear also on the machine, use less fuel potentially and the mix quality will be better. R&s will last longer also.
Also, dont put the hoses up until the material is spraying nicely through the lance.
To be fair mate, krend silicone is notoriously difficult to pump. Its the only product I refuse to use.do 2 coat in this wet mix flaten 1st and leave to pick up on 2nd before ruling it is wat im aiming far nice and wet .
Parex sprays like a dream through the k4. Will only get about 10 pallets from an r&s though it seems to eat through them quickly.cheers mate very useful info for me there i have heard a few bad things about spraying silicone it can be a nightmare 40m2 and go funny. iv got a couple parex jobs to do atm so hopefully it runs smooth . thanks tho big bish
Are u cheaper than pft for themYes, we do a B4-2L
U can get a after mixer for the ritmo makes a big differenceHonestly f**k of the krend its awful. Needs an mtex m330 to get the mix right. apparently they have superior mixing abilities.
Just recieved one and can confirm they are slightly cheaper.Are u cheaper than pft for them
How much I get my ones at a good price. Be interesting to see how u get on with it.Just recieved one and can confirm they are slightly cheaper.
Yet to use it.