spunky
Private Member
Big thanks to Andy, Ryan and all the lads at pft, we must have spent the best part of 4 hours going back through the operation of the machine, had our Genny fixed on site, a hose cut down to more usable lengths a good look around the training facilities etc which look spot on they've got a whole room with windows, doors, facias, a fake roof so you know where you learn how to add profiles to extend the roof line etc
Got offered loads of cups of coffee had a chance to look at a hot knife which cuts profiles into board and had a look at some cracking beads for external render there very rigid and have got a very thin arris so its a lot less noticable with white beads for different coloured render at a very good price ask Ryan
p.s anyone looking at the metal s*p*r*lex trowel ****** sell have a look at the one Ryan's selling you can barely feel them in you're hand light as fook
sorry if this sounds a bit grovelling but credit where credits due we felt very looked after cheers
Got offered loads of cups of coffee had a chance to look at a hot knife which cuts profiles into board and had a look at some cracking beads for external render there very rigid and have got a very thin arris so its a lot less noticable with white beads for different coloured render at a very good price ask Ryan
p.s anyone looking at the metal s*p*r*lex trowel ****** sell have a look at the one Ryan's selling you can barely feel them in you're hand light as fook
sorry if this sounds a bit grovelling but credit where credits due we felt very looked after cheers
Last edited: