Plasterers1StopShop
Well-Known Member
With temperatures as low as -3 last night the following message is extremely important for machine owners. Some of you may remember we posted this a month or so ago, but now is the time to really make sure you do the most simple thing on your machine!
Due to the freezing temperatures, it’s very important you start draining the water from your machine at the end of play everyday. Failure to do this can not only damage flow tubes but also caused more serious issues with Regulators and Pumps.
We have attached some images to show the relevant valves to the M-tec M330, M200 and EZE K4 which require draining - make sure you leave them open also.
If you’re not 100% sure, please give us a call on 01242 236699 and we will be happy to help
P1 - here for our customers
Due to the freezing temperatures, it’s very important you start draining the water from your machine at the end of play everyday. Failure to do this can not only damage flow tubes but also caused more serious issues with Regulators and Pumps.
We have attached some images to show the relevant valves to the M-tec M330, M200 and EZE K4 which require draining - make sure you leave them open also.
If you’re not 100% sure, please give us a call on 01242 236699 and we will be happy to help
P1 - here for our customers
