Neat angles

[Adam clifton]

Good evening just wanted to ask how you boys get a nice defined edge on these angles, I’ve tried free hand , but using 3 mm stop beads tomorrow. Thx

 

[CeeVee]

I usually use stop beads

 

[Stewie03]

b*ll***s to it get some bonding mixed up and curve it f**k the customer

 

[Adam clifton]

b*ll***s to it get some bonding mixed up and curve it f**k the customer

That’s the spirit

 

[Stewie03]

That’s the spirit

But yes stop beads work well

 

[Adam clifton]

But yes stop beads work well

Yes they certainly do a bit time consuming but the end result is bang on as long as the boarding is ok .

 

[essexandy]

Good evening just wanted to ask how you boys get a nice defined edge on these angles, I’ve tried free hand , but using 3 mm stop beads tomorrow. Thx

Freehand (trowel and featheredge), but I'm a plasterer, others will do it some other amateurish way (@John j ).

 

[John j]

Freehand (trowel and featheredge), but I'm a plasterer, others will do it some other amateurish way (@John j ).

Should be able to get a nice line with that angle
Stop bead will crack

 

[ChrispyUK]

Laser line and trowel to it

 

[theshed]

Ping a chalk line and work to it.

 

[CeeVee]

OK go one angle freehand and one angle stop bead.
Then get back to me and I'll say I told you so.