Gyproc coving

[Donzo]

Been a while since I put some up.
But noticed on box packaging, use cove adhesive only.
I used to remember easy fill was in its spec to put it up. Looks like no longer for what ever reason. Why the change.

 

[paulf]

Use to sometimes use Lafarge fast set for gyproc coving, but switched back to cove adhesive. Cove adhesive is much better to use, it goes further and it's a better fine filer.
Easifill, was the only fail I ever had, even with the background keyed and a really pissy coat of pva.

 

[Donzo]

Easyfill has failed a few times,,,,especially on painted surfaces for me.

 

[paulf]

Easyfill has failed a few times,,,,especially on painted surfaces for me.

I dry fit it first get my joints right, once it's all pinned up mark top and bottom, then physically key the background and a weak coat pva if it's painted.
If I've skimmed the ceiling and walls, I just wet it with my water brush until the suction is killed enough.

 

[Sitemonkey]

I dry fit it first get my joints right, once it's all pinned up mark top and bottom, then physically key the background and a weak coat pva if it's painted.
If I've skimmed the ceiling and walls, I just wet it with my water brush until the suction is killed enough.

Cove adhesive is what I use it's good gear

 

[malc]

I dry fit it first get my joints right, once it's all pinned up mark top and bottom, then physically key the background and a weak coat pva if it's painted.
If I've skimmed the ceiling and walls, I just wet it with my water brush until the suction is killed enough.

I cut 2 templates, push them together ,when correct just mark top and bottom.

 

[ChrispyUK]

Lionel Ritchie is good at coving

 

[paulf]

Lionel Ritchie is good at coving

Oh what feeling.

 

[paulf]

Lionel Ritchie is good

The truth is out there.

 

[Spitandpolish]

The truth is out there.
View attachment 77521

Its not .

 

[paulf]

Its not .

Not for you.

 

[Spitandpolish]

Not for you.

Or you, sweetheart x

 

[paulf]

Or you, sweetheart x