Its rather a large jump tho...double the price than the last one!The one we sell is the best for it. We have tested so many different A/C and in all honesty, this knocks spots off them all. You can always buy cheaper, but they wont last or do the job as well
Its rather a large jump tho...double the price than the last one!
Is this the equivalent of v meko Ryan?
Bucket coats?In my honest opinion, is better than the V Meko
Bucket coats?
So you can spray silicone topcoats with it?It’s the same we use on the M200. Perfect for plaster, render and thin coats
So you can spray silicone topcoats with it?
Or this?
https://www.machinemart.co.uk/p/clarke-xepv1650-industrial-air-compressor-230v/
@Plasterers1StopShop I don't think I'm gonna spend over a grand for a compressor...sorry but...can you help me?
Couldn't this one do?
Displacement CFM is 13
https://www.thoritedirect.co.uk/pro..._ltr_receiver_230_volt_13_amp/?search=th1450p
You need at least 14 cfm. The second one willOr this?
https://www.machinemart.co.uk/p/clarke-xepv1650-industrial-air-compressor-230v/
@Plasterers1StopShop I don't think I'm gonna spend over a grand for a compressor...sorry but...can you help me?
You need at least 14 cfm. The second one will
Do the job, but have you seen them in flesh....huuuge. The question is for how long they will work on daily basis before they stop for some time, where vmeko and Ryan’s compressors wil cary on all day without problem. Last but not least - no oil.I have one for repair, but can’t be arsed tbh and will get vmeko when the time is right. Shame Ryan sells 110 only
Yeah seen them they are bloody massive.You need at least 14 cfm. The second one will
Do the job, but have you seen them in flesh....huuuge. The question is for how long they will work on daily basis before they stop for some time, where vmeko and Ryan’s compressors wil cary on all day without problem. Last but not least - no oil.I have one for repair, but can’t be arsed tbh and will get vmeko when the time is right. Shame Ryan sells 110 only
@Plasterers1StopShop
Ok...I know I didn't buy the compressor from you guys but the EZE originally came from you....so....
What are the pressure settings to go into the EZE?
The last one I just left as it was and I didnt take much notice.
I got the Gentilin comp that used to come with the machine...
Where did you get the Gentilin from mate?Thanks @Plasterers1StopShop for getting me up and running with the new compressor.
PFT Northern.Where did you get the Gentilin from mate?
are you saying PFT northern works for PFT CENTRALPFT Northern.
Not too far from me
Now now stop causing trouble!are you saying PFT northern works for PFT CENTRAL
That makes sense
Me?!?! I am just reading through your threadNow now stop causing trouble!
Me?!?! I am just reading through your thread
are you saying PFT northern works for PFT CENTRAL
That makes sense
Oooh I'll take a shop on!Plasterers 1 Stop Shop Franchise’s coming soon
nice, that will save me some money14 cfm bud.
Yeah the original system used the gentilin and it was designed for bucket coats.
How much did you get one for? P M if you don’t want to say14 cfm bud.
Yeah the original system used the gentilin and it was designed for bucket coats.
Just under 700 sheets.How much did you get one for? P M if you don’t want to say
Beltin little compressor that’ll do years of work. Good buy thatJust under 700 sheets.
Expensive but better than 1200...