We keep an eye on it ,when it runs low ,fill it back up with the accelerator, only takes 5/10 minutes depending on water pressure from the mainIt would be a 220 mate we use the small ones at the min so I suppose you have to dose the barrels first? How do you carry on spraying and keep the water topped up?
To be honest ,if you can keep the walls dry ,we sometimes nail old tars to them ,you will have no problems ,but with a accelerator ,it is always a bit hit and miss ,all depends on north / south facing ,you know Dave . Trying one from @UKPlasteringmachines as it is clear and a good price ,before that we used wicks :RpS_blushing: did the job ,but not clear :RpS_blushing:thanks Keith have you had any problems etc and what accelerator do you use?
Thats ok if you want to carry them in your van ,one is fine mateAlso has anyone tried it wth two or three water butts and swap between them while there spraying?
If we get a big job they'd just be left there mate, we've had 3-4 lads on jobs so try and spray a few metres, if we can switch butts it would help if not it's not the end of the worldThats ok if you want to carry them in your van ,one is fine mate
lolI don,t know ,but as i was told ,if anyone looked in the water butt ,it did look a bit brown :RpS_scared: