There was a reason you choose cammy wearing as a careerOven paint
Well what sort of paint would YOU use on an oven?There was a reason you choose cammy wearing as a career
The oven prior to plastering got very hot , whether the insulation reduces this by a big enough percentage I can’t sayI would of thought any exterior masonry paint would be ok. It's not like a fire place where the heat is there over a longer duration but, I'm probably under thinking it and there will be a better product.
What paint would you use , ?
I've used stove paint loads of times on renovations for stoves but, never on masonry, tbh I'd be ringing a decorator centre and asking them. There are certainly fire retardant paints out there cos I've seen them used where peep's want to leave beams and boards exposed but, still meet fire regs.The oven prior to plastering got very hot , whether the insulation reduces this by a big enough percentage I can’t say
How’d you knowJust use your colouring crayons!
Go on... you know you want to!
I've used stove paint loads of times on renovations for stoves but, never on masonry, tbh I'd be ringing a decorator centre and asking them. There are certainly fire retardant paints out there cos I've seen them used where peep's want to leave beams and boards exposed but, still meet fire regs.
That - as far as I know - is intumescent paint and it's retardant by swelling up when it's activated by heat.
That be no good at all.
I've used it before when a customer wanted a wooden kitchen ceilingA* good effort,
you could obviously be bothered to spend the time on Google unlike me.
Must be some sort of heat resistant paint google itWhat paint would you use , ?
How you make the oven wouldn’t mind having a go at one?
You fell right into his trap, or did you?How you make the oven wouldn’t mind having a go at one?
how hot does the outside actually get? cant see it getting so hot
They said it got really hot , this was prior to the insulation and render though ,how hot does the outside actually get? cant see it getting so hot
I can't see a bit of condensed Rockwall keeping a lot of heat in.They said it got really hot , this was prior to the insulation and render though ,
I think you're getting confused with Giant Tortoises me old mate.I've always thought for safety if nothing else that there should be a vented shell
What’s the vent for that’s on the shell ? MmmI've always thought for safety if nothing else that there should be a vented shell
I had no idea , that was the spec , a crap spec but a specI can't see a bit of condensed Rockwall keeping a lot of heat in.
I'd have probably done it mid-joist.I would have built the oven then left an inch gap after insulation and rendered the exterior with a few holes top and bottom, would be a lot safer